美国ACE Feed液压控制器

以最准确的方式调整进给速率

作为锯切，磨削，切割和钻孔的理想解决方案，为了避免粘滑，建议使用ACE液压进给控制器。 它可以非常精确地调节压力，在低进给力下保证速度高于12 mm / min，在高进给力下保证高达38 m / min。 免维护，组装精密液压控制器是一个封闭的液压元件，可精确调节油门。 同时，可以通过旋转调节元件从外部调节进给速度。 安装在产品内部的滚动隔膜密封系统在使用寿命中起着重要作用，它还用于平衡活塞杆的容积室和复位元件。

Adjust feed rate in the most accurate way

As an ideal solution for sawing, grinding, cutting and drilling, in order to avoid stick-slip, it is recommended to use the ACE hydraulic feed controller. It regulates the pressure very precisely, guarantees speeds above 12 mm / min at low feed forces and up to 38 m / min at high feed forces. Maintenance-free, the assembled precision hydraulic controller is a closed hydraulic component that precisely adjusts the throttle. At the same time, the feed rate can be adjusted externally by rotating the adjustment element. The rolling diaphragm seal system installed inside the product plays an important role in the service life. It is also used to balance the volume chamber and the reset element of the piston rod.